HDMI 비디오를 당신의 콤포지트 나 S-Video 시스템에서 오디오를 포함하여 즐길 수 있다.
 
새로운 GefenTV HDMI to Composite Scaler는 HDMI 480i - 1080i 사이에 있는 어떠한 해상도 비디오도 콤포지트 나 S-Video 신호로 변환 시켜 주고 이러한 디스플레이에 맞추어 출력 시켜 준다.
 
(사용방법)
간단하게 HDMI 비디오 소스를 GefenTV 입력 잭에 연결하고 콤포지트나 S-Video 디스플레이 케이블을 Scaler 후면의 올바른 자리에 연결 한다. RCA 오디오 아날로그 출력 잭과 Coaxial S/PDIF 디지탈 오디오 출력 출력 잭은 오디오 리시버 연결 또는 HDMI 시그널안에 엠비디드된 오디오 신호를 받는 장치를 위하여 사용 된다. 이러한 모든 연결 작업은 리모콘과 스크린 메뉴등을 이용하여 손쉽게 세팅 하고 수정 할 수 있다. 여러분은 HDMI 비디오를 콤포지트 마 S-video 디스플레이에서 오디오와 함께 즐길 수 있을 겁니다. 

Note: 이 장비는 표준 NTSC와 PAL 방식 비디오 지원.

Features:

• HDMI to Composite / S-Video conversion plus scaling
• Supports HDTV input resolutions of 480p up to 1080p at 50/60 Hz and computer resolutions from VGA to UXGA at 60Hz.
• Outputs 480i / 576i signal for Composite/S-Video
• Supports both NTSC and PAL formats

Specifications:

• Input Video Signal: 1.2V p-p
• Input Sync Signal: 5V p-p (TTL)
• Video In/Out: (1) HDMI 19-pin Female, type "A"
• Video In/Out: (1) Composite RCA female jack / (1) S-Video female Mini-DIN connector
• Audio In/Out: (2) L/R RCA audio, (1) S/PDIF digital audio jack, female coaxial
• Horizontal Frequency Range: 31-70 KHz
• Vertical Frequency Range: 50-60 KHz
• Power Consumption: 13 Watts (maximum)
• Power Supply: 5V DC
• Shipping Weight: 4 lbs.

Watch HDMI Video on your Composite or S-Video System -- with Audio

The new GefenTV HDMI to Composite Scaler lets you transform HDMI video in resolutions from 480p to 1080p into Composite video or S-Video format, properly sized to view optimally on your display.

How It Works

Simply connect your HDMI video source to the HDMI input jack of the GefenTV HDMI to Composite Scaler. Connect your Composite or S-Video display cable to the correct video output jack on the Scaler's rear panel. RCA-type analog audio output jacks and Coaxial S/PDIF digital audio output jacks allow for the connection of an audio receiver or other device to receive the audio signal embedded in the HDMI signal. Power-cycle all connected components. You will then have HDMI video playing on your Composite or S-Video display with simultaneous audio output.

Note:  This device does NOT convert HDCP.
This device supports both NTSC and PAL video standards.
This device maintains the aspect ratio of the original signal.

The main purpose for the GTV-HDMI-2-COMPSVID is to downscale high definition video to standard definition NTSC / PAL, from digital to analog TV signals. The GTV-HDMI-2-COMPSVID does not accept standard-resolution 15KHz (Horizontal Frequency) video signals as input (i.e. 480i and 576i resolutions). Source devices operating at resolutions of 480i / 576i will very likely have analog outputs which can be used to directly connect to display devices in these cases.

Supported HDTV input resolutions include:

480p@50 / 60Hz
576p@50 / 60Hz
720p@50 / 60Hz
1080i/p@50@/ 60Hz


Supported PC input resolutions include:

640x480@60Hz
800x600@60Hz
1024x768@60Hz
1280x1024@60Hz
1600x1200@60Hz